Why Your Skateboard Turning on Its Own?

 


Reasons Why Your Skateboard Turns on Its Own? Are you having trouble controlling your skateboard? Do you feel like your skateboard is turning on its own? You’re not alone.

Many people have this problem of their skateboard turning on its own. In this article, we will explain the 11 common reasons why your skateboard turns on its own and How to Fix a Skateboard That Turns by Itself.

How to Fix a Skateboard that Turns by Itself

Your skateboard turning on its own is a common problem that most beginners face at one time or another. This can be very frustrating, especially when you’re just starting out and trying to learn how to ride.

There are a few reasons why your skateboard turns on its own. One reason is that your weight isn’t centered properly on the board. Another reason could be that you’re not using the right stance or positioning yourself correctly while riding.

Fix & Reasons Why Your Skateboard Turns on Its Own

Skateboarding is a unique sport that takes time to learn. It can be frustrating when you’re trying to do a trick and your board does its own thing. So, what causes your skateboard to turn on its own? There are several factors that can contribute to this common problem.

Bad Bushings -  Why Your Skateboard Turns Left or Right?

One of the most common problems with skateboard turning on its own – and one that can be fixed relatively easily – is bad bushings. 

Bushings are small, cylindrical pieces of metal or plastic that connect the truck to the skateboard. When they’re in good condition, they allow the truck to turn easily; when they’re bad, they can make the skateboard difficult to control and cause it to turn in unintended directions.

How to Fix Bad Bushing

There are a few things that you can do to try to fix bad bushings on your own. However, if they are really bad, you may need to take your skateboard to a shop to have them fixed. One thing that you can do is to try to clean them. Use a toothbrush and some soap to scrub the dirt and grime off of the bushings. Once they are clean, dry them off with a towel.

Another thing that you can do is add some lubricant. This will help them to move more freely. You can either use a lubricant specifically made for skateboard bushings or you can use some WD-40.

If neither of those things works, then you may need to replace the bushings.

Trucks Too Loose or Too Tight - how to fix a skateboard that turns by itself

There are a lot of things that go into making a skateboard turn. The trucks are a big part of it. If they’re too loose, the board will turn easier and if they’re too tight, the board will be harder to turn.

Trucks that are too loose can be fixed by tightening the nut on the bolt that holds the truck together. This will make the truck stiffer and make it harder for the board to turn. If the trucks are too tight, you can loosen the nut to make them looser.

How to Fix Truck of Skateboard Turning on its own

You can fix your loose skateboard trucks by:

  1. Pushing down on the front truck and pulling up on the back truck.

  2. Putting a washer or some other object between the board and the trucks.

  3. Tightening the screws on the trucks.

Incorrect Skateboard Deck Shape

The shape of your skateboard deck can also affect your balance and control. Skateboard decks come in a variety of shapes and sizes, and each one is designed for a specific style of skating. For example, decks that are wider and shorter are generally better for beginners, as they provide more stability and balance. Decks that are longer and narrower are better for more advanced skaters, as they offer greater speed and agility.

If you're using a deck that's the wrong shape for your level of skill or style of skating, you may have a harder time maintaining balance and control. It's important to choose a deck that's appropriate for your needs and abilities.

Worn Down or Faulty Pivot Cup Bushing

There are a few things that could be wrong if your skateboard is turning left or right. One of the most common problems is a worn down or faulty pivot cup bushing.

This small, but the important piece is responsible for keeping your wheels in line, and when it’s not working properly, your skateboard will start to veer in one direction or the other.

How to Fix Faulty Pivot Cup Bushing

If you are having this issue with your skateboard, take it to a professional skateboard technician to have the problem fixed or you can fix worn down or faulty pivot cup bushing by spraying it with Pivot Cup Bushing Lube.

Slippery or Dirty Grip Tape

Grip tape is the rough, abrasive material applied to the top of a skateboard deck to provide traction for the feet. If the grip tape is slippery or dirty, it can make it harder to maintain balance and control on the skateboard.

To keep your grip tape in good condition, it's important to regularly clean it and remove any dirt or debris that may have accumulated on it. You can use a soft bristle brush or a cloth to gently scrub the grip tape and remove any dirt or grime. You should also avoid getting the grip tape wet, as this can make it slippery and difficult to use.

If the grip tape becomes too worn or damaged, it may be necessary to replace it. This is a relatively simple process that can be done at home with the proper tools and materials.

Alignment of the Deck

When you ride a skateboard, the deck (the board that you stand on) turns to the left or right because of the trucks (the metal pieces that hold the wheels). The trucks are attached to the deck in a way that makes one side turn faster than the other. This is what makes the skateboard go in a straight line.

If your skateboard turns to the left, it means that the right side of your truck is turning faster than the left. This is because the right truck is closer to the ground than the left truck. 

How to Fix Deck

To fix this, you can do one of two things

  • Turn your board so that the left truck is closer to the ground.

  • Turn the nut on the right side of your truck counterclockwise (clockwise if you are in Europe) until it is tighter than the nut on the left side. This will make the right truck turn slower than the left truck, and your skateboard will go in a straight line.

Incorrect Skateboard Setup

The way that you set up your skateboard can also affect your balance and control. It's important to ensure that all of the components of your skateboard are properly adjusted and tightened, as this will help you maintain stability and control.

Some things to check when setting up your skateboard include the tightness of the trucks, the alignment of the wheels, and the condition of the grip tape. You should also make sure that the deck is properly centered and that your feet are positioned correctly on it.

Worn Wheels - How to Fix a Skateboard That Turns by Itself? 

One potential cause of a skateboard that turns by itself is worn wheels. When the wheels are worn, they will not roll as smoothly as they did when they were new. This can cause the board to start rolling on its own, especially if it is on a smooth surface.

If you suspect that your wheels are worn, you can test them by rubbing them against a piece of paper. If the wheel leaves a black mark on the paper, it is likely that it needs to be replaced. You can purchase replacement wheels online or at a skate shop.

Once you have replaced the wheels, you may need to adjust the trucks on your board so that they are tighter than they were before. This will help keep the board from rolling on its own.

The wheels on your skateboard determine how it turns. The two main factors that affect wheel turning are the wheel’s size and the wheel’s offset.

The size of the wheel is important because it determines how much surface area is in contact with the ground. A larger wheel will have more surface area in contact with the ground, which means it will take longer to make a turn. This is why longboards turn more slowly than regular skateboards.

Offset is the distance the center of the wheel is from the axle. When the offset is positive, the wheel will turn to the right. When it’s negative, the wheel will turn to the left. This is why some wheels are labeled ‘R’ for right and ‘L’ for left.

Bent Truck Axles - How to fix a skateboard that turns by itself

There are a few solutions you can try to fix your bent truck axle. If your skateboard turns by itself, the first thing you should do is take it to a skateboard shop and have them check it out. They will be able to tell you if it’s something that can be fixed with a simple adjustment or if you need a new truck axle.

If the shop tells you that you need a new truck axle, you can try to fix it yourself. All you need is a skate tool, which you can buy for around $10.00. The skate tool will help you adjust your truck axle so that it is straighter.

If your truck axle is bent, it can be difficult to skate. You may find that your skateboard turns by itself and it is hard to do tricks. If this is the case, you should take it to a skateboard shop and have them check it out. This will make your problem of the skateboard turning on its own solved.

Broken Bearings

A skateboard that turns by itself can be caused by a broken bearing. A bearing is a small metal component in the skateboard that helps it rotate. When a bearing is broken, it can cause the skateboard to turn by itself.

There are two ways to fix a broken bearing: you can either replace the bearing or you can clean it. To replace the bearing, you will need to remove the wheel from the skateboard and take out the bearing. To clean the bearing, you will need to remove the wheel from the skateboard and soak it in a cleaning solution.

Another common reason why your skateboard might start turning on its own is that the bearings are not lubricated properly. When the bearings are not lubricated, they can start to wear down and cause the skateboard to turn on its own.

If you think that the bearings might be the problem, you can lubricate them by using a skateboard-bearing lubricant or some household oil. Apply a small amount of lubricant to each bearing and then spin it a few times. This will help to keep the bearings lubricated and prevent them from wearing down.

Warped Skateboard Deck

A warped skateboard deck can be really frustrating. It makes it difficult to do tricks and can even make the skateboard turn by itself. This can be really dangerous, especially if you are riding on a busy street or somewhere with a lot of people.

Fortunately, there is a way to fix a warped skateboard deck. You don’t need any special tools or equipment, and it only takes a few minutes to do. All you need is a skateboard deck, some water, a bowl, and a towel.

Here’s how to fix a warped skateboard deck:

  • Fill the bowl with water and place the skateboard deck in the water.

  • Let the skateboard deck sit in the water for about 5 minutes.

  • Remove the skateboard deck from the bowl and place it on a towel.

  • Use the towel to dry off the skateboard deck.

  • Let the skateboard deck dry for about 10 minutes.

  • Test the skateboard deck to see if it is flat.

Improper Foot Placement

One of the most common mistakes made by skateboarders is improper foot placement. This can lead to a loss of balance and control, and can even result in accidents and injuries. To avoid this, it's important to place your feet correctly on the skateboard.

When setting up your feet on the skateboard, start by placing your back foot on the tail and your front foot on the nose. 

The tail is the back end of the skateboard, and the nose is the front end. Your back foot should be positioned so that the ball of your foot is just over the edge of the tail.

 This will allow you to easily push off the ground and gain momentum. Your front foot should be positioned slightly further forward, with the ball of your foot placed just in front of the middle of the nose. This will give you greater control over the direction and speed of the skateboard.

It's also important to pay attention to the position of your feet on the deck. They should be centered and evenly spaced, with your weight distributed evenly between them. This will help you maintain balance and control.

Lack of Balance and Weight Distribution

Maintaining balance and proper weight distribution on a skateboard is essential for safe and successful riding. When you're not balanced, you'll have a harder time controlling the skateboard, and you'll be more prone to accidents and injuries.

To maintain balance, it's important to keep your feet centered on the deck and evenly spaced. You should also try to distribute your weight evenly between your feet. This will help you maintain control and stability.


Base Plates and Mounting Holes

One of the most common reasons is that the base plates and mounting holes are not aligned properly. When they are not aligned, it can cause the skateboard to turn or wobble as you ride it.

If you have recently started having this problem, the first thing you should do is check the alignment of your base plates and mounting holes. You can do this by using a level or a straight edge. If they are not aligned, you will need to adjust them so that they are.

Inexperience or Lack of Practice

If you're new to skateboarding or if you haven't ridden in a while, you may have a harder time maintaining balance and control on your skateboard. This is because skateboarding requires a certain level of skill and coordination, which can only be developed through practice and experience.

To improve your balance and control, it's important to practice regularly and gradually build up your skills. You should also start with easier tricks and gradually work your way up to more challenging ones.

Riding on Uneven or Slippery Surfaces

Riding on uneven or slippery surfaces can also make it difficult to maintain balance and control on a skateboard. These types of surfaces can cause the skateboard to wobble or slide unexpectedly, which can lead to accidents and injuries.

To avoid these types of hazards, it's important to choose a smooth, stable surface to skate on. If you're riding in an area with uneven or slippery surfaces, you should be extra careful and try to avoid these areas if possible.

Incorrect Skateboard Maintenance

Proper maintenance of your skateboard is essential for maintaining balance and control. If you neglect to maintain your skateboard, it may not function properly, which can lead to a loss of balance and control.

To keep your skateboard in good working order, you should regularly check and adjust all of the components, such as the trucks, wheels, and grip tape. You should also clean and lubricate the bearings and replace any worn or damaged parts as needed.

Interference from External Factors (e.g. Wind, Debris)

External factors such as wind and debris can also affect your balance and control on a skateboard. Strong gusts of wind can cause the skateboard to sway or drift, and debris on the ground can cause the wheels to lose traction and slip.

To minimize the impact of these factors, it's important to pay attention to your surroundings and be prepared for any potential hazards. You should also try to ride in areas with minimal wind and debris, and avoid riding in adverse weather conditions if possible.

How to Skateboard in a Straight Line?

Skateboarding in a straight line is an important skill to master, as it is the foundation of many other tricks and techniques. Here are a few tips to help your skateboard in a straight line:

  1. Start by finding a smooth, flat surface to skate on. This will make it easier to maintain balance and control.

  2. Position your feet correctly on the skateboard. Your back foot should be placed on the tail, and your front foot should be placed on the nose.

  3. Shift your weight onto your back foot, and push off with your front foot to get the skateboard to move.

  4. As you gain speed, shift your weight back to the center of the skateboard. This will help you maintain balance and control.

  5. Look ahead and focus on a point in the distance. This will help you stay on track and keep the skateboard moving straight.

  6. Use small adjustments to your body position and foot placement to make small corrections to your course. For example, if you're drifting to the left, you can shift your weight slightly to the right to steer the skateboard back on course.

  7. Practice regularly to improve your balance and control. As you gain more experience, you'll be able to skateboard in a straight line more easily.

Remember, it's important to always wear protective gear, such as a helmet, knee pads, and elbow pads when skateboarding to reduce the risk of injury.

Steer by Leaning - Why Skateboard Turning on its Own?

The most common cause of the steer-by-leaning problem is incorrect weight distribution. When you’re skateboarding, your weight should be distributed evenly between your front and back wheels. If it’s not, your board will start turning by itself as one wheel becomes overloaded.

There are a few things you can do to correct weight distribution and fix the steer-by-leaning problem. First, make sure you’re standing up straight and not leaning too far forward or backward. Also, try to keep your feet parallel to each other rather than pigeon-toed or splayed out. And lastly, practice doing wheelies and 180s so that you can better control your balance on the board.

Conclusion of Skateboard Turning on its Own

This article looked at some of the reasons why your skateboard might start turning on its own. By understanding the causes, you can work to prevent your skateboard from turning. If you have any questions or need help with your skateboard, please contact us.

Post a Comment

0 Comments
* Please Don't Spam Here. All the Comments are Reviewed by Admin.